Everything you need to know about our drilling tools
How to deal with faults in the walking system?
If there is any abnormality during the operation of the rotary drilling rig, the walking system needs to be checked. It may be a malfunction of the walking motor, and the motor needs to be replaced; It is also possible that the chain is worn and needs to be replaced.
How to deal with oil pump failure
The rotary drilling rig uses a hydraulic system, and oil pump failure can cause the entire system to fail. It may be due to poor sealing of the oil pump, and the sealing ring needs to be replaced; It is also possible that the inlet and outlet of the oil pump are blocked, and the entire oil circuit needs to be cleaned.
What should I do if the drill bit wears out
As the use time of the rotary drilling rig increases, the drill bit will gradually wear out, affecting the drilling efficiency. The problem can be solved by replacing the drill bit. When replacing the drill bit, attention should be paid to the connection between the drill bit and the drill rod, and the tightness should be appropriate.
What should I do if the pipeline is blocked
Pipeline blockage is one of the common faults of rotary drilling rigs. When this situation occurs, it is necessary to first shut down the machine to investigate the cause of the malfunction. It may be a malfunction of the mud mixer, which can be cleaned and maintained; It is also possible that the mud pipeline is blocked and needs to be dismantled for cleaning.